SEE PHOTOS
DESIGN:
2 precision ground cutting edges with chipbreakers
Excellent chipflow and lower heat retention is provided by the semi-polished 2 flute design
Fast feed rates are possible due to the high performance tool geometry
Submicron, corrosion resistant, extended life carbide provides increased durability
30° helix design with bottom cutting capability
APPLICATION:
Chipbreakers reduce tear-out and improve chipflow by reducing the size of the chips
Chipbreakers lower noise levels and cutting pressure
Increased cutting edge life when frequently accelerating/decelerating or performing multiple passes
Eliminates chipping, fuzzing, and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces
When cutting rebates, dados or pockets use an upcut length that is at least 1/16" shorter than the shallowest cut
If part movement is a concern, use an upcut length of 4.8mm(0.188") or shorter
When possible, select a router bit with a longer upcut length to improve chip ejection from cutting path
For improved dust extraction use with an Aerotech
MATERIALS:
Good finish on:
Softwoods and hardwoods
Plywood
OSB
Unfaced chipboard
LINEAGE XLC
Extended life resharpenable