Finishing Compression Z=2+2

SEE PHOTOS

DESIGN:

2 precision ground cutting edges

Excellent chipflow and lower heat retention is achieved by the semi-polished flutes

Increased cutting edge durability from special submicron, extended life carbide

30° helix design with bottom cutting capability

APPLICATION:

For exceptionally smooth finishing cuts

Increased cutting edge life when frequently accelerating/decelerating or performing multiple passes

Eliminates chipping, fuzzing, and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces

When cutting rebates, dados, or pockets, use and upcut length that is at least 1/16" shorter than the shallowest cut

If part movement is a concern use an upcut length of 0.200" or 5mm or shorter

When possible, select a router bit with a longer upcut length to improve chip ejection

For improved dust extraction use with an Aerotech

MATERIALS:

Excellent finish on:

Laminated panels

HPL (XLC recommended)

Chipboard

MDF

Good finish on:

Softwoods and hardwoods

Plywood

OSB

Solid surface

LINEAGE XLC:

Extended life resharpenable coating