SEE PHOTOS
DESIGN:
2 precision ground cutting edges
Excellent chipflow and lower heat retention is achieved by the semi-polished flutes
Increased cutting edge durability from special submicron, extended life carbide
10° helix design with bottom cutting capability
Low helix design reduces deflection in hard materials and lifting forces
APPLICATION:
For exceptionally smooth finishing cuts
Increased cutting edge life when frequently accelerating/decelerating or performing multiple passes
Improved cutting edge life when cutting hard materials
Reduces noise levels during cutting operations of hard materials
Ideal for plywood panels
Eliminates chipping, fuzzing, and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces
When cutting rebates, dados or pockets, use and upcut length that is at least 1/16" shorter than the shallowest cut
If part movement is a concern, use an upcut length of 4.8mm (0.188") or shorter
When possible, select a router bit with a longer upcut length to improve chip ejection from cutting path
For improved dust extraction use with an Aerotech
MATERIAL:
Excellent finish on:
Softwoods and hardwoods
Plywood
OSB
MDF
HPL
Solid surface
Phenolic
LINEAGE XLC
Extended life resharpenable coating
