SEE PHOTOS
DESIGN:
Optimized for high speed, dust free cutting with the Aerotech Universal Hydro
2 precision ground cutting edges
Excellent chipflow and lower heat retention is achieved by semi-polished flutes
Increased cutting edge durability from special submicron, extended life carbide
30° helix design with bottom cutting capability
IMPORTANT:
Dust (Chips) must remain moderately loose and unpacked in the cut to achieve optimal dust extraction
High Upcut design is recommended for maximum dust extraction
APPLICATION:
For exceptionally smooth finishing cuts
Increased cutting edge life when frequently accelerating/decelerating or performing multiple passes
Eliminates chipping, fuzzing and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces
When cutting rebates, dados, or pockets, use an upcut length that is at least 1/16" shorter than the shallowest cut
If part movement is a concern, use an upcut length of 4.8mm (0.188") or shorter
MATERIAL:
Excellent finish on:
Laminated panels
Chipboard
Good finish on:
Softwoods and Hardwoods
MDF
Plywood, OSB
(requires Aerotech Flange type: GRILL)
