SEE PHOTOS
DESIGN:
3 precision ground cutting edges with chipbreakers
Good chipflow and lower heat retention is provided by the semi-polished 3 flute design
Submicron, corrosion resistant, extended life carbide provides increased durability
30° helix design with bottom cutting capability
APPLICATION:
Chipbreakers reduce tear-out and improve chipflow by reducing the size of chips
Chipbreakers lower noise levels and cutting pressure
Reduced run-out in parting cuts as 2 cutting edges are engaged at all times
3 cutting edges provide faster feed rates at low spindle speeds
Ideal for robust spindles as more power is required to drive three cutting edges
Eliminates chipping, fuzzing, and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces
When cutting rebates, dados, or pockets, use an upcut length that is at least 1/16" shorter than the shallowest cut
If part movement is a concern, use an upcut length of 4.8mm (0.188") or shorter
When possible, select a router bit with a longer upcut length to improve chip ejection from cutting path
For improved dust extraction use with an Aerotech
MATERIALS:
Good finish on:
Softwoods and hardwoods
Plywood
OSB
Unfaced chipboard
LINEAGE XLC:
Extended life resharpenable coating
