SEE PHOTOS
DESIGN:
3 precision ground scalloped cutting edges
Excellent chipflow and lower heat retention is achieved by the semi-polished flutes
Submicron, corrosion resistant, extended life carbide provides increased durability
10° helix design with bottom cutting capability
Low helix upshear design reduces deflection and lifting forces in hard materials
APPLICATION:
Clean but uneven surface finish is produced by the aggressive scalloped cutting edge design
Scalloped edges produce small chips, allowing higher feed rates with less cutting pressure in hard materials and roughing applications
Reduced run-out in parting cuts as 2 cutting edges are engaged at all times
Increased tool life and performance in hard materials and roughing/hogging applications
Reduced noise levels during cutting operations of hard materials
3 cutting edges provide faster feed rates at low spindles speeds
Ideal for robust spindles as more power is required to drive three cutting edges
Upward cutting action provides good chip ejection from the cutting path
Eliminates chipping, fuzzing, and tear-out along the bottom surface of the board
MATERIALS:
Recommended for:
Softwoods and hardwoods
Plywood
OSB
