SEE PHOTOS
STANDARD SET CONSISTS OF:
Arbor and nut AR11
Ball bearing B5
Spacers 6.0mm (2 pieces) WF618
Washer 1.0mm (1 piece) WF608
Shims 0.5mm (2 pieces) WF606
Shims 0.1mm (4 pieces) WF604
Cutters 1-5/8" D
1/4" kerf x 2 teeth (2 pieces) FRB28G
ANGULAR TONGUE AND GROOVE CUTTER SET
This Tongue and Groove Cutter enables perfect results in stock up to 18mm (approx. 3/4"). The groove is of 1/4" (6.35mm) in width and of 3/8"(9.5mm) in depth.
When changing over from assembly (A) to assembly (B), according to the drawings in the photos, the centre of the groove is automatically adjusted and there is no need to raise or lower the router. With the aid of the supplied shims, there is always the possibility to achieve the required tightness of the joint, even after resharpening groovers.
